The crew replaces rotted fascia board and fits vented soffit panels across Berks County, and the Wernersville phone is answered around the clock.
Amatucci Roofing has cut out rotted fascia and refitted tired soffit around Wernersville since 1972. The crew works the roof edge across Berks County and Lancaster County, on rowhomes, farmhouses and split levels alike.
A visit starts on a ladder at the eave. The roofer finds where water entered, cuts the damage back to solid wood, and closes the edge again with new board, panel and trim.
Learn more about our Amatucci Roofing in Wernersville.
The crew takes on five jobs at the roof edge: rotted board replacement, aluminum wrap, vented soffit panels, attic airflow, and drip edge.
Rotted fascia holds water against the gutter spikes and the deck ends. The roofer cuts the soft run out, checks the rafter tails behind it, and sets new board on solid wood.
Aluminum wrap covers sound fascia board in coil stock bent on site. The bend sheds water off the board face, and the color stays put without paint. Wrapping suits eaves above a second story.
Vented soffit panels replace solid board or brittle vinyl under the eave. Perforations pull outside air up the rafter bay toward the ridge. Panels lock into a channel at the wall and a receiver at the fascia.
Soffit vents feed the intake side of attic airflow. Blocked or missing intake leaves hot damp air trapped under the deck, where sheathing delaminates and frost forms on nail points in winter.
Drip edge is the metal angle set between fascia and the roof covering. The edge throws runoff into the gutter instead of behind it, which keeps a new fascia board dry.
Peeling paint on the fascia, dark streaks down the board, and soffit panels sagging away from the wall are the signs a homeowner sees first. Birds or wasps working in and out of a gap at the eave point to an open soffit. Gutter spikes pulling loose mean the fascia behind them has gone soft.
Inside the attic, daylight along the eave line and damp insulation at the edge tell the same story. Squirrels enter through a rotted corner and stay. A house that has held ice at the eave through a Berks County winter earns a look at the boards.
Roofers in the area quote one range for partial fascia and soffit repairs: $300 to $1,200 for a damaged run of board.
| Job | Typical range |
|---|---|
| Partial soffit and fascia section, damaged run cut out | $300 to $1,200 |
Rotted board length, eave height, panel material and rafter tail damage move the number. The crew prices the run after measuring the eave on site.
The crew handles fascia and soffit work from Wernersville across Berks County and Lancaster County, from Sinking Spring and Wyomissing out to Ephrata and Lebanon.
