★★★★★ 5 stars on Google, family owned since 1972

Skylight Installation and Repair in Wernersville, PA

Amatucci Roofing sets new skylights and repairs leaking ones across Berks and Lancaster Counties, working from the Wernersville shop, phones open 24 hours.

50+ Years Local 24/7 Emergency Line 5★ Google Family Owned
50+ Years in Business
5★ Google Rating
24/7 Phone Answered
23 Towns Covered

Amatucci Roofing has cut, set and repaired skylights on Berks County homes since 1972, and the same family still runs the shop. Skylight work happens on the roof, so a roofer carries it from the shingles to the ceiling drywall.

The crew frames the opening, sets the unit on a curb, weaves new metal flashing into the shingle field, and closes the light shaft inside. Older units come out as the new skylight goes in.

What does skylight work involve on a house?

Skylight installation means cutting an opening through the roof deck, framing a curb, and setting a glazed unit on top. Metal flashing then weaves into the surrounding shingles so rain runs around the frame instead of into it. Repair work covers the same parts as they age: fogged glass, split flashing, a dried seal, or rotted curb wood. Both skylight jobs finish inside, where the light shaft meets the ceiling drywall.

What kinds of skylight work does the crew handle?

The crew handles five kinds of skylight work: fixed units, vented units, tubular daylights, flashing replacement, and glass and curb repair.

Fixed skylights

A fixed skylight is a sealed glass panel that never opens. Fixed units suit stairwells, hallways, and bathrooms that want daylight rather than airflow, and a frame with no moving parts keeps the leak path simple.

Vented skylights

A vented skylight opens on a hinge, by hand crank or by remote motor. Vented units pull hot air out of a kitchen or a bathroom in July and clear shower steam off the ceiling.

Tubular daylights

A tubular daylight carries sunlight down a reflective tube from a small dome on the roof into a windowless room. Closets, laundry rooms, and interior hallways take a tube where a full skylight does not fit.

Flashing replacement

Skylight flashing is the metal collar that ties the frame into the shingle field. The crew strips the old collar, sets fresh head, sill, and step pieces, and relays the shingles over the new metal.

Glass and curb repair

Fogged glass and rotted curb wood turn an older skylight into a leak. The crew swaps the glazing panel or rebuilds the wood curb under the frame, then reflashes the opening and seals the joint.

What signs point to a failing skylight?

Three signs point to a failing skylight: a brown ring on the ceiling, fog between the panes, and daylight at the frame edge. A drip during heavy rain that dries up in fair weather points at the flashing rather than the glass. Older plastic skylight domes crack and yellow, and the seal at the curb hardens.

New skylight openings start from the inside: a dark stairwell, a north-facing kitchen, or a bathroom with no window. The crew measures rafter spacing in the attic before pricing a skylight opening.

How much do homeowners pay for a skylight?

Two ranges frame what homeowners pay. Roofers in the area quote $1,651 to $2,236 for a skylight replacement, with a full spread of $774 to $3,874.

JobTypical range
Skylight replacement, typical job$1,651 to $2,236
Skylight replacement, low to high spread$774 to $3,874

Unit size, roof pitch, curb framing, and the length of the ceiling shaft move the number. The crew prices each skylight after measuring the opening on site.

Which towns does the crew cover for skylight work?

The crew covers towns across Berks County and Lancaster County from the Wernersville shop, including Reading, Sinking Spring, Wyomissing, Shillington, Lititz, and Ephrata.

What else comes up when planning a skylight?

What are the downsides of skylights?
Heat gain and one more roof penetration are the two downsides. A south-facing skylight adds summer heat to the room below unless the glass carries a low-e coating or a shade. Every skylight also breaks the shingle field, so the flashing detail decides how long the ceiling stays dry.
How hard is it to add a skylight to an existing roof?
A skylight fits into an existing roof without rebuilding it. The crew cuts the deck between two rafters, frames a curb, sets the unit, and reflashes the shingles around it. An opening wider than one rafter bay needs a header, which adds framing work inside the attic.
How much does it cost to install a skylight in an existing roof?
Local roofers quote $1,651 to $2,236 to fit a skylight in an existing roof, with the spread running $774 to $3,874. A fixed unit in an open rafter bay sits at the low end. A vented unit with a long ceiling shaft sits near the top.
Are skylights worth the money?
Yes, a skylight earns its cost in rooms with no other daylight. A unit over a dark stairwell or an interior bathroom lights the space through the day, and a vented one clears steam off the paint. A room with two windows gains less from a skylight.
Should you replace skylights when replacing a roof?
Yes, an old skylight comes out while the shingles are off. Skylight flashing ties in properly only under fresh courses. Leaving a worn unit under a new roof puts the oldest part of the assembly under the newest shingles. A second tear-off around the skylight costs more later.

Ready to price a skylight for your roof?

Amatucci Roofing answers the phone 24 hours from the Wernersville shop and puts the skylight price in writing after measuring the opening.

(610) 678-8810
Call (610) 678-8810